Gator Harley-Davidson® 1745 US-441, Leesburg, FL 34748
Map & Hours 352-787-8050
352-787-8050
Welcome to the Service Department

Welcome to the Service Department

Our factory-trained technicians and outstanding service staff are here to keep you and your Harley-Davidson® bike where you belong - on the open road. Meet the men who baby your baby here.

From Scheduled maintenance to custom upgrades we have the factory approved parts, tools and diagnostic equipment to keep your motorcycle tuned to exacting Harley-Davidson® standards.

Regular maintenance will help keep your Harley-Davidson® motorcycle operating at peak performance

Below are example breakdowns of what to expect when you bring in your motorcycle for its regular services.

Mandatory Services

  1. Inspect: Electrical equipment and switches
  2. Check: Front tire pressure and tread 
  3. Check: Front wheel spoke tightness (if equipped) 
  4. Inspect: Front brake fluid level 
  5. Lubricate: Clutch cable 
  6. Adjust: Clutch cable 
  7. Check: Front brake fluid moisture content 
  8. Tighten: Hand control switch housing screw torque 
  9. Tighten: Clutch lever handlebar clamp screw torque 
  10. Tighten: Front brake handlebar clamp screw torque 
  11. Replace: Engine oil and filter 
  12. Check: Engine coolant 
  13. Clean: Radiators or oil cooler
  14. Replace: Primary chaincase lubricant 
  15. Replace: Transmission lubricant 
  16. Inspect: Oil and brake lines 
  17. Inspect: Fuel lines and fittings 
  18. Inspect: Rear brake fluid level
  19. Check: DOT4 rear brake fluid moisture content 
  20. Inspect: Brake pads and discs
  21. Tighten: Front axle nut torque 
  22. Lubricate: Jiffy stand 
  23. Lubricate: Brake and clutch controls 
  24. Check: Rear wheel spoke tightness (if equipped) 
  25. Check: Rear tire pressure and tread 
  26. Inspect: Drive belt and sprockets 
  27. Adjust: Drive belt 
  28. Tighten: Rear axle nut torque
  29. Inspect: Exhaust system, fasteners and shields
  30. Lubricate: Fuel door hinge and latch
  31. Road Test: Component and system functions

Services As Required

  1. Flush brake systems and replace DOT hydraulic brake fluid every two years or sooner if moisture content is 3 percent or greater.
  2. Inspect rear sprocket isolators for wear at each rear tire change.
  3. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT. 
  4. Replace spark plugs every two years or every 30,000 mi (48,000 km), whichever comes first.
  5. Replace fuel filter element every 100,000 mi (161,000 km).

Mandatory Services

  1. Inspect: Electrical equipment and switches
  2. Check: Front tire pressure and tread
  3. Check: Front wheel spoke tightness (if equipped)
  4. Inspect: Front brake fluid level
  5. Lubricate: Clutch cable
  6. Adjust: Clutch cable
  7. Check: Front brake fluid moisture content
  8. Inspect: Air cleaner filter
  9. Replace: Engine oil and filter
  10. Check: Engine coolant
  11. Clean: Radiators or oil cooler
  12. Inspect: Oil and brake lines
  13. Inspect: Fuel lines and fittings
  14. Inspect: Rear brake fluid level
  15. Check: DOT4 rear brake fluid moisture content
  16. Inspect: Brake pads and discs
  17. Lubricate: Jiffy stand
  18. Lubricate: Brake and clutch controls
  19. Check: Rear wheel spoke tightness (if equipped)
  20. Check: Rear tire pressure and tread
  21. Inspect: Drive belt and sprockets
  22. Adjust: Drive belt
  23. Inspect: Exhaust system, fasteners and shields
  24. Lubricate: Fuel door hinge and latch
  25. Road Test: Component and system functions

Services As Required

  1. Flush brake systems and replace DOT hydraulic brake fluid every two years or sooner if moisture content is 3 percent or greater.
  2. Inspect rear sprocket isolators for wear at each rear tire change.
  3. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT. 
  4. Replace spark plugs every two years or every 30,000 mi (48,000 km), whichever comes first.
  5. Replace fuel filter element every 100,000 mi (161,000 km).

Mandatory Services

  1. Inspect: Electrical equipment and switches
  2. Check: Front tire pressure and tread
  3. Inspect: Front brake fluid level
  4. Lubricate: Clutch cable
  5. Adjust: Clutch cable
  6. Check: Front brake fluid moisture content
  7. Tighten: Hand control switch housing screw torque
  8. Tighten: Clutch lever handlebar clamp screw torque
  9. Tighten: Front brake handlebar clamp screw torque
  10. Inspect: Windshield bushings (if equipped)
  11. Inspect: Air cleaner filter
  12. Replace: Engine oil and filter
  13. Check: Engine coolant
  14. Clean: Radiators or oil cooler
  15. Replace: Primary chaincase lubricant
  16. Inspect: Oil and brake lines
  17. Inspect: Fuel lines and fittings
  18. Inspect: Rear brake fluid level
  19. Check: DOT4 rear brake fluid moisture content
  20. Inspect: Brake pads and discs
  21. Tighten: Front axle nut torque
  22. Lubricate: Jiffy stand
  23. Lubricate: Brake and clutch controls
  24. Check: Rear tire pressure and tread
  25. Inspect: Drive belt and sprockets
  26. Adjust: Drive belt
  27. Tighten: Rear axle nut torque
  28. Inspect: Exhaust system, fasteners, and shields
  29. Lubricate: Fuel door hinge and latch
  30. Road Test: Component and system functions

Services As Required

  1. Flush brake systems and replace DOT hydraulic brake fluid every two years or sooner if moisture content is 3 percent or greater.
  2. Inspect rear sprocket isolators for wear at each rear tire change.
  3. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT. 
  4. Replace spark plugs every two years or every 30,000 mi (48,000 km), whichever comes first.
  5. Replace fuel filter element every 100,000 mi (161,000 km).

Mandatory Services

  1. Inspect: Electrical equipment and switches
  2. Check: Front tire pressure and tread
  3. Inspect: Front brake fluid level
  4. Lubricate: Clutch cable
  5. Adjust: Clutch cable
  6. Check: Front brake fluid moisture content
  7. Inspect: Air cleaner filter
  8. Replace: Engine oil and filter
  9. Check: Engine coolant
  10. Clean: Radiators or oil cooler
  11. Inspect: Oil and brake lines
  12. Inspect: Fuel lines and fittings
  13. Inspect: Rear brake fluid level
  14. Check: DOT4 rear brake fluid moisture content
  15. Inspect: Brake pads and discs
  16. Lubricate: Jiffy stand
  17. Lubricate: Brake and clutch controls
  18. Check: Rear tire pressure and tread
  19. Inspect: Drive belt and sprockets
  20. Adjust: Drive belt
  21. Inspect: Exhaust system, fasteners and shields
  22. Lubricate: Fuel door hinge and latch
  23. Road Test: Component and system functions

Services As Required

  1. Flush brake systems and replace DOT hydraulic brake fluid every two years or sooner if moisture content is 3 percent or greater.
  2. Inspect rear sprocket isolators for wear at each rear tire change.
  3. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT. 
  4. Replace spark plugs every two years or every 30,000 mi (48,000 km), whichever comes first.
  5. Replace fuel filter element every 100,000 mi (161,000 km).

Mandatory Services

  1. Inspect: Electrical equipment and switches
  2. Check: Front tire pressure and tread
  3. Check: Front wheel spoke tightness (if equipped)
  4. Inspect: Front brake fluid level
  5. Lubricate: Clutch cable
  6. Adjust: Clutch cable
  7. Check: Front brake fluid moisture content
  8. Tighten: Hand control switch housing screw torque
  9. Tighten: Clutch lever handlebar clamp screw torque
  10. Tighten: Front brake handlebar clamp screw torque
  11. Inspect: Windshield bushings (if equipped)
  12. Inspect: Air cleaner filter
  13. Replace: Engine oil and filter
  14. Check: Engine coolant
  15. Clean: Radiators or oil cooler
  16. Replace: Primary chaincase lubricant
  17. Replace: Transmission lubricant
  18. Inspect: Oil and brake lines
  19. Inspect: Fuel lines and fittings
  20. Inspect: Rear brake fluid level
  21. Check: DOT4 rear brake fluid moisture content
  22. Inspect: Brake pads and discs
  23. Tighten: Front axle nut torque
  24. Lubricate: Jiffy stand
  25. Lubricate: Brake and clutch controls
  26. Check: Rear wheel spoke tightness (if equipped)
  27. Check: Rear tire pressure and tread
  28. Inspect: Drive belt and sprockets
  29. Adjust: Drive belt
  30. Tighten: Rear axle nut torque
  31. Inspect: Exhaust system, fasteners and shields
  32. Lubricate: Fuel door hinge and latch
  33. Road Test: Component and system functions

Services As Required

  1. Flush brake systems and replace DOT hydraulic brake fluid every two years or sooner if moisture content is 3 percent or greater.
  2. Inspect rear sprocket isolators for wear at each rear tire change.
  3. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT. 
  4. Replace spark plugs every two years or every 30,000 mi (48,000 km), whichever comes first.
  5. Replace fuel filter element every 100,000 mi (161,000 km).

MORE THAN AN OIL CHANGE

Keep your motorcycle operating at peak performance with H-D® Authorized Service. We know best how to service your bike with factory-approved methods and equipment assuring you of thorough and competent workmanship. Our regular maintenance always includes a comprehensive performance and safety inspection along with so much more. Why risk anything less?

  1. Replace engine oil, filter, and drain plug O-ring. Torque drain plug to proper specification. Ensure proper oil level at operating temperature. 
  2. Check operation of all electrical equipment, lighting, and controls. 
  3. Inspect front and rear tire tread depth and air pressure. Check tightness of oil spokes (if equipped). 
  4. Inspect fluid level and moisture content of front brake reservoir. Check torque of cover screws.
  5. Check torque of switch housing screws, clutch level handlebar clamp screws, and master cylinder handlebar screws. 
  6. Check engine coolant freeze point and inspect for leaks. Clean radiators or oil cooler. 
  7. Drain and replace primary chaincase lubricant and drain plug O-ring. (if applicable)
  8. Drain and replace transmission lubricant and drain plug O-ring. (if applicable) 
  9. Inspect oil, brake and fuel lines and fittings for leaks, contact, or abrasions. 
  10. Inspect rear brake reservoir for proper fluid level and moisture content. Check torque of cover screws. 
  11. Inspect front brake pads and discs. Ensure pad thickness is within specification. 
  12. Inspect rear brake pads and discs. Ensure pad thickness is within specification. 
  13. Check torque of front and rear axle nut. 
  14. Inspect and lubricate jiffy stand. 
  15. Lubricate clutch cable. Ensure proper cable adjustment and hand lever free play.
  16. Check, adjust, and lubricate brake and clutch controls. 
  17. Inspect and adjust drive belt or chain. Inspect wheel sprocket. 
  18. Inspect exhaust system for leaks, cracks and loose or missing fasteners or exhaust shields. 
  19. Check battery, clean connections and torque terminal screws. 
  20. Lubricate the fuel door, hinge, and latch. 
  21. Check for open recalls, products campaigns, trouble codes, and software updates. 
  22. Flush brake and clutch systems and replace DOT 4 brake and clutch fluids every two years. 
  23. Road test – verify component and system functions. 

Depicted are areas serviced during the recommended 1000-mile service for 2024 Touring Models.
 Refer to owner’s for more details.

 

REQUEST A SERVICE APPOINTMENT

Required
Required
Required
Required
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.